Reaction Engineering Aspects of α-l,4-D-Glucan Phosphorylase Catalysis

Some important process properties of α-l,4-D-ghican phosphorylases isolated from the bacteriumCorynebacterium callunae and potato tubers (Solatium tuberosum) were compared. Apart from minor differences in their stability and specificity (represented by the maximum degree of maltodextrin conversion) and a 10-fold higher affinity of the plant phosphorylase for maltodextrin (K _M of 1.3 g/L at 300 mM of orthophosphate), the performances of both enzymes in a continuous ultrafiltration membrane reactor were almost identical. Product synthesis was carried out over a time course of 300–400 h in the presence or absence of auxiliary pullulanase (increasing the accessibility of the glucan substrate for phosphorolytic attack up to 15–20%). The effect of varied dilution rate and reaction temperature on the resulting productivities was quantitated, and a maximum operational temperature of 40°C was identified.     

Insights into the structure of cyclohexane from femtosecond degenerate four-wave mixing spectroscopy and ab initio calculations

In this paper, we report the use of femtosecond time-resolved degenerate four-wave mixing rotationally resolved spectroscopy to obtain very accurate structural information on the symmetric top cyclohexane. Apart from highlighting the versatility of this method in determining accurate structures of large and complex molecules without dipole moment, the present study also details the comparison of the experimentally determined rotational constant B(0) with that obtained from high-level ab initio calculations. The theoretical calculations, which were carried out at both the second-order M?ller-Plesset (MP2) and coupled-cluster with single, double, and perturbative triple substitutions [CCSD(T)] levels of theory, also take into account vibrational averaging effects. A detailed investigation of the vibrational averaging effects reveals that the corrections emerge from only the six highly symmetric A(1g) modes, a justification of which is provided by an analysis of these modes.     

X-Ray Study of the Deformation Density in Tetrafluoroterephthalodinitrile: Weak Bonding Density in the C,F-Bond

A careful deformation density study of tetrafluoroterephthalodinitrile at 98K has been made from X-ray diffraction measurements. Prominent ‘bonding density’ peaks are found at or near the mid-points of the C, C- and C, N-bonds but not for the C, F-bonds, which show only weak density. Similarly weak bonding densities for C, F-bonds are also found for 1, 1, 4, 4-tetrafluorocyclohexane. The possible significance of these results in terms of bonding theory is briefly discussed.     

Improved separation of palladium species in biological matrices by using a combination of gel permeation chromatography and isotachophoresis

The binding of palladium to high-molecular-mass compounds in palladium-treated lettuce is investigated as an example for a biological matrix. The total palladium concentration in lettuce leaves is 10.3 ng/g wet weight. After homogenization, high-molecular-mass compounds (> 10 kDa) are isolated by ultrafiltration. For separation of these palladium species a combination of preparative gel permeation chromatography (GPC) and preparative isotachophoresis (ITP) is used. Palladium is determined in separated fractions by using a highly sensitive total reflection X-ray fluorescence (TXRF) method after preconcentration. After GPC separation, four main fractions of palladium species are collected, each containing palladium in ng quantities (3-10 ng). Two of these fractions are further separated by ITP, yielding at least three main peaks per GPC fraction, each containing palladium in the range of 0.3-3 ng. These palladium containing peaks are characterized by high-performance size exclusion chromatography (HPSEC) and capillary isotachophoresis (cITP) in parallel. HPSEC enables the estimation of the molecular mass of six main palladium peaks, covering a molecular mass range of 69-200 kDa. It is also shown that the estimation of molecular mass after separation is more reliable than the respective estimation directly in the first GPC run. However, cITP reveals that each of the separated peaks is still a mixture of at least five different compounds.     

Determination of (R)- and (S)-phenprocoumon in human plasma by enantioselective liquid chromatography/electrospray ionisation tandem mass spectrometry

Phenprocoumon is a commonly used oral anticoagulant of the coumarin type, and has found extensive clinical use in the treatment of thrombophlebitis, pulmonary embolism and atrial fibrillation. In the course of a clinical study to investigate the influence of genetic polymorphisms of the CYP2C9 enzyme on phenprocoumon metabolism, we developed a new enantioselective liquid chromatography/electrospray ionisation tandem mass spectrometry (LC/MS/MS) method to quantify (R)- and (S)-phenprocoumon in human plasma. HPLC separation of the enantiomers was achieved on a Chira-Grom-2 column under isocratic conditions using a water/acetonitrile/formic acid eluent. For detection and quantification a triple-quadrupole MS system was used in the selected reaction monitoring (SRM) mode. As an internal standard the structurally homologous compound warfarin was chosen. The detector response was linear with a correlation coefficient of 0.988-0.999 for (R)-phenprocoumon and 0.989-0.999 for (S)-phenprocoumon in the investigated concentration range between 62.5 and 1000 ng/mL (per enantiomer). The limit of detection (LOD) was 12.5 ng/mL.     

Analysis of spin states, spin barriers, and trans-effects involved in the coordination and stabilization of dinitrogen by biomimetic iron complexes

Coordination of dinitrogen to Sellmann-type iron (II) complexes in a sulfur-dominated coordination sphere, which emulates the environment of iron centers in the FeMo-cofactor of nitrogenase, is analyzed with respect to spin states, spin barriers, and the effect of trans-ligands. Such detailed investigations became only recently feasible when the reliability of density functional methods, which are the only quantum chemical methods capable of describing large transition metal complexes, could significantly be improved for the calculation of energies for states of different spin. It is found that the actual binding energy of dinitrogen is of sufficient magnitude for a reasonably strong fixation of N₂ by Sellmann-type coordination compounds. However, potential fixation is determined by additional factors which reduce the binding energy. One factor is the change in spin state of the N₂-free metal fragment, which lowers the total energy and quenches the thermodynamic stabilization effect of the binding energy. In addition, the metal fragment rearranges and gains even more stabilization energy for the un-coordinated state. Apart from these thermodynamical effects, the existence of spin barriers, which must be overcome upon binding of dinitrogen, leads to kinetical effects, which cannot be neglected.     

A novel phosphoramidite method for automated synthesis of oligonucleotides on glass supports for biosensor development

Two protocols for functionalization of glass supports with hexaethylene glycol (HEG)-linked oligonucleotides were developed. The first method (standard amidite protocol) made use of the 2-cyanoethyl-phosphoramidite derivative of 4,4′-dimethoxytrityl-protected HEG. This was first coupled to the support by standard solid-phase phosphoramidite chemistry followed by extension with a thymidylic acid icosanucleotide. Stepwise addition of the linker phosphoramidite graduated at 1% (relative to the total sites available) perstep at 50°C resulted in an optimal yield of immobilized oligonucleotides at a density of 2.24 × 10¹⁰ strands/mm². This observed loading maximum lies well below the theoretical maximum loading owing to nonspecific adsorption of HEG on the glass and subsequent blocking of reactive sites. Surface loadings as high as 3.73 × 10¹⁰/mm² and of excellent sequence quality were achieved with a reverse amidite protocol. The support was first modified into a 2-cyanoethyl-N,N-diisopropylphosphoramidite analog followed by coupling with 4,4′-dimethoxytrityl-protected HEG. This protocol is conveniently available when using a conventional DNA synthesizer. The reverse amidite protocol allowed for control of the surface loading at values suitable for subsequent analytical applications that make use of immobilized oligonucleotides as probes for selective hybridization of sample nucleic acids of unknown sequence and concentration.     

Tantalum Clusters in Oxidic Matrices — Synthesis,Crystal Structure and Magnetic Properties of Eu1.83Ta15O32

The mixed‐valent oxotantalate Eu_1.83Ta₁₅O₃₂ was prepared from a compressed mixture of Ta₂O₅ and the metals in a sealed Ta ampoule at 1400 °C. The crystal structure was determined by means of single crystal X‐ray diffraction: space group R3¯, a = 777.2(6) pm and c = 3523.5(3) pm, Z = 3, 984 symmetrically independent reflections, 83 variables, R_F = 0.027 for I > 2σ (I). The structure is isotypic to Ba₂Nb₁₅O₃₂. The salient feature is a [Ta(+8/3)₆O₁₂ⁱO₆^a] cluster consisting of an octahedral Ta₆ core bonded to 12 edge‐bridging inner and six outer oxygen atoms. The clusters are arranged to slabs which are sandwiched by layers of [Ta(+5)₃O₁₃] triple octahedra. Additional Ta(+5) and Eu(+2) atoms provide the cohesion of these structural units. Twelve‐fold coordinated Eu(+2) atoms are situated on a triply degenerate position 33 pm displaced from the threefold axis of symmetry. A depletion of the Eu(+2) site from 6 to 5.5 atoms per unit cell reduces the number of electrons available for Ta‐Ta bonding from 15 to 14.67 electrons per cluster. Between 125 and 320 K Eu_1.83Ta₁₅O₃₂ is semi‐conducting with a band gap of 0.23 eV. The course of the magnetization is consistently described with the Brillouin function in terms of a M_mol/(N_Aμ_B) versus B/T plot in the temperature range 5 K — 320 K and at magnetic flux densities 0.1 T — 5 T. At moderate flux densities (< 1 T) the magnetic moment agrees fairly well with the expected value of 7.94 μ_B for free Eu (2+) ions with 4f⁷ configuration in ⁸S_7/2 ground state. Below 5 K, anisotropic magnetization measurements at flux densities B < 1 T point to an onset of an antiferromagnetic ordering of Eu spins within the layers and an incipient ferromagnetic ordering perpendicular to the layers.     

Optimization of auxiliary basis sets for the LEDO expansion and a projection technique for LEDO-DFT

We present a systematic procedure for the optimization of the expansion basis for the limited expansion of diatomic overlap density functional theory (LEDO-DFT) and report on optimized auxiliary orbitals for the Ahlrichs split valence plus polarization basis set (SVP) for the elements H, Li--F, and Na--Cl. A new method to deal with near-linear dependences in the LEDO expansion basis is introduced, which greatly reduces the computational effort of LEDO-DFT calculations. Numerical results for a test set of small molecules demonstrate the accuracy of electronic energies, structural parameters, dipole moments, and harmonic frequencies. For larger molecular systems the numerical errors introduced by the LEDO approximation can lead to an uncontrollable behavior of the self-consistent field (SCF) process. A projection technique suggested by L?wdin is presented in the framework of LEDO-DFT, which guarantees for SCF convergence. Numerical results on some critical test molecules suggest the general applicability of the auxiliary orbitals presented in combination with this projection technique. Timing results indicate that LEDO-DFT is competitive with conventional density fitting methods.